ODP - Three Phase WEG Open Drip Proof motors are designed to meet demanding applications in environments where dirt and humidity are minimal. These motors are specifically designed to provide maximum ventilation and heat dissipation. Inverter Rated: 1000 : 1 for variable torque
Electric Totally Enclosed Fan Cooled (TEFC) Close Coupled Pump motors are designed to meet the demands of industrial and commercial pumping applications. Ideal for centrifugal pump applications requiring JM or JP shafts, these close coupled pump motors meet or exceed EISA 2007 requirements for premium efficiency. Featuring a cast iron frame with IP55 protection, Electric TEFC Close Coupled motors are available with horsepower ratings from 1 to 50 HP and in 3600 or 1800 RPM.
TEFC - Three Phase High performance with maximum energy efficiency, this is the meaning of the new WEG electric motor. High efficiency and Low cost of Ownership throughout the entire motor lifetime have been the basis for the W22 development. A design created to anticipate concepts on performance and energy savings.
Close Coupled Pump Motor Applications Water Pumping | Process | Transfer and Circulating Pumps | Specially Developed Line for Commercial and Industrial Pumping Applications | Water Pumping | Process Pumping | Golf Course Pumping | Rice Paddy Pumping WEG’s W22 cast iron platform has an improved cooling system and solid feet for cooler operation and reduced vibration and noise extending the life of the motor.
Standard Features: • 50/60 Hz rated (380V on Nameplate - 400/415 Available - Same Horse Power at 50 Hz with a 1.0 service factor) • Class F insulation (Impregnation Resin and Magnet wire are class H) • F1 Mounted (Cast Iron frames are F2 convertible) • Stainless Steel Nameplate - Laser etched with high contrast background • Regreasable ball bearings (Frames 254JM/JP and up) • Gasketed conduit box • Class I, Div. 2, Groups A, B, C & D – T3, Class II, Div 2, Groups F & G – T3C
The Close Couple Pump motors answer the call for all JM and JP Close Couple Pump Applications. These rugged Close Coupled Pump Motors are of heavy duty construction with all cast iron frames, junction boxes, junction box covers and a state-of-the-art all steel fan covers for maximum cooling. Features include 1.15 service factors, class F winding and insulation, v-ring shaft seals on both drive and opposite drive ends. Centrifugal close coupled pump motors where the pump impeller is mounted directly to the motor shaft using a JM or JP shaft will benefit from our high quality Close Couple Pump Motors. Close Coupled Pump Motor Features
All ratings totally enclosed fan cooled (TEFC) All cast iron frame Class F winding insulation Premium quality ball bearings V-ring shaft seals on drive end and opposite drive end Solid all cast iron mounting feet All cast iron junction box with rubber gasket and rubber dust curtain
All steel fan cover Inverter Rated: 1000 : 1 for variable torque CLOSE-COUPLED PUMP MOTORS Premium Efficiency Inverter Duty, 10:1 CT / 20:1 VT (1.0 SF) Spike Resistant Wire, per NEMA MG-1, Part 31 Class 1, Division 2, Groups A, B, C, D Suitable for 50 Hz Operation with 1.0 SF Standard motor is gray in color (Model PEWWE). Limited stock is available in green (Model PEGWWE) and blue (Model PEBWWE).
Features that make a difference: • 50/60 Hz rated (380V on Nameplate - 400/415 Available - Same Horse Power at 50 Hz with a 1.0 service factor) • Class F insulation (Impregnation Resin and Magnet wire are class H) • F1 Mounted (Cast Iron Frame motors are F2 convertible) • Stainless Steel Nameplate - Laser etched with high contrast background (Cast Iron Frame only) • Regreasable ball bearings (Frames 254JM/JP and up) • Aegis Ring ™ inside. See page 229 Features that make a difference: • 1.25 service factor • Optimized ventilation system for cooler operation and reduced noise levels • Solid base for reduced vibration levels • NPT Threaded terminal box • Aegis Ring ™ inside.
In-Stock and Ready to Ship We aim to make our customers more competitive by stocking the products they need and responding to their requirements with a shared sense of urgency. With $30 million of ready-to-ship inventory at six regional US warehouses, we’re ready to assist you!
| Type | Three Phase Versatile Motors |
|---|---|
| Manufacturer | WEG |
| Motor Power (KW) | 18.5 KW |
| Number of Poles | 4 |
| Feature | Pump Motors |
| Enclosure | TEFC |
| Motor Body Material | Rolled Steel |
| Frame Type | NEMA |
| Frame Size | 284/6JM |
| Mounting Arrangements | C-Face – Foot Mount |
| Voltage Class | 208-230/460 V |
| Insulation Class | F |
| IE Class | IE2 |
| IP Rating | IP55 |
| PDF Download | Single-Phase General Purpose Motors |
ABB's digital energy management system provides technical support for the transition from "dual control" of energy consumption to "dual control" of carbon emissions
Electrification, digitization, and automation are key measures to achieve carbon neutrality
ABB motors are Swiss brands
ABB Group, a Swiss brand, is one of the world's top 500 companies and enjoys a good reputation the world. It has thousands of companies in more than 100 countries and involves many industries, such as manufacturing, processing, consumer goods, public utilities, oil, and gas, etc. Its China branch factory is located in Shanghai. Its two cores are power technology and automation technology. ABB has 23 branches, sales offices in China, and 27 joint ventures and wholly-owned companies, with more than 6,500 employees in China alone. The main business in China: a complete series of power transformers and distribution transformers, high, medium, and low voltage switches, electrical drive systems, and motors.
